TS3A5017D Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. There is 4:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. There are 16 terminations totally. High-quality output is provided by the electronic component's 4 channels. When the electronic component is given a voltage of 2.5V, it should be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Unlike digital switches, these are based on SP4T switching circuits. This multiplexer is composed of 2 circuits. Try searching for the analog switch ic with TS3A5017 if you are looking for variants. There is 12Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. A cost-effective Single supply type analogue multiplexer. A low voltage of 2.3V should be applied to the electronic component. This digital switch can be operated with a current of 2.5μA. A voltage of 2.3V~3.6V is required to drain this analog switch from a single voltage supply. If put voltage greater than 7μA on the device, damage may be caused to the analogue multiplexer. It is possible to transfer data over a 165MHz-bandwidth. Multiplexer ics with 8 outputs are available.

TS3A5017D Features

4 Channels
Switch Circuit: SP4T
2.5μA Supply Current
Bandwidth: 165MHz

TS3A5017D Applications

There are a lot of Texas Instruments TS3A5017D Analog Switches & Multiplexers ICs applications.

• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• HDTV
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Communication systems
• SONET/SDH ADM
• Relay replacements
• DSLAMs
• Fiber In The Loop (FITL)
• Digital Cross-Connects
• Precision instrumentation