ADG202AKRZ Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature around -40°C~85°C TA extended. In total, there are 16 terminations. Due to its 4 channels, the electrical component produces high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. The analog switch ics are built using SPST - NO switching circuits. Using the ADG202 search parameter, you can discover variants of the switch. This digital multiplexer has 90Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 25V volts for the multiplexer. A analog switch ic that has a cost-effective Dual supply type. 600μA current would be enough for this multiplexer to operate. If you put voltage higher than 2mA on the digital multiplexer, damage may occur. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. Operating voltages of 15V are compatible with the electrical part. Drain to Source resistance is 60Ohm.

ADG202AKRZ Features

4 Channels
Switch Circuit: SPST - NO
600μA Supply Current
Drain-to-Source resistance: 60Ohm

ADG202AKRZ Applications

There are a lot of Analog Devices Inc. ADG202AKRZ Analog Switches & Multiplexers ICs applications.

• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• High-Voltage
• Cellular phones
• Power routing
• Microwave transmission systems
• Imaging
• Communications systems
• Cross Connects
• Ultrasound
• Modems