MAX312LEUE+T Overview

Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature around -40°C~85°C TA extended. In total, there have been 16 terminations. By its 1 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. An electrical component of this type can be found in the 16 series. The analog switch ics are built using SPST - NC switching circuits. A total of 4 circuits make up this switch device. Look for analog switch ic variants by searching with MAX312. In this multiplexer, the internal resistance is 10Ohm. Datasheets for functions of 16 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 30V. It is recommended that the electrical component receives a voltage of 4.5V. A voltage higher than 200μA may cause damage to the switch multiplexer. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. It is recommended that you attach at least 4.5V to your dual power supply. This analog switch ic utilizes SEPARATE OUTPUT output. The electrical part can be operated at 18V voltage levels.

MAX312LEUE+T Features

1 Channels
Switch Circuit: SPST - NC

MAX312LEUE+T Applications

There are a lot of Maxim Integrated MAX312LEUE+T Analog Switches & Multiplexers ICs applications.

• Cross Connects
• Optical Applications
• High speed data transmission line cards
• PDAs
• Battery Powered Instruments
• T1/E1 Terminals
• Video signal routing
• Sample hold systems
• Residential Gateways, Home Gateway/Router
• Ultrasound