5.8ns, 3.6ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A2066 8 Pins 30nA 1.8V 8-VFSOP (0.091, 2.30mm Width)
SOT-23
TS5A2066DCURE4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Lifecycle Status
ACTIVE (Last Updated: 6 days ago)
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-VFSOP (0.091, 2.30mm Width)
Number of Pins
8
Weight
9.610488mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Resistance
10Ohm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Multiplexer or Switches
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
2
Supply Voltage
1.8V
Terminal Pitch
0.5mm
Base Part Number
TS5A2066
Output
SEPARATE OUTPUT
Pin Count
8
Number of Channels
2
Max Supply Voltage
5.5V
Min Supply Voltage
1.65V
Operating Supply Current
100nA
Nominal Supply Current
100nA
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
6.4 ns
Number of Inputs
2
Supply Type
Single
Bandwidth
300MHz
Turn-Off Delay Time
4.9 ns
On-State Resistance (Max)
10Ohm
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
68 dB
Current - Leakage (IS(off)) (Max)
30nA
Channel Capacitance (CS(off), CD(off))
5.5pF 5.5pF
On-state Resistance Match-Nom
0.9Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
5.8ns, 3.6ns
Charge Injection
1pC
Channel-to-Channel Matching (ΔRon)
1 Ω
Crosstalk
-68dB @ 10MHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
11.5ns
Voltage - Supply, Single (V+)
1.65V~5.5V
Normal Position
NO
Height
900μm
Length
2.3mm
Width
2mm
Thickness
850μm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
TS5A2066DCURE4 Product Details
TS5A2066DCURE4 Overview
As the electronic part is packed in 8-VFSOP (0.091, 2.30mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Extended operating temperature around -40°C~85°C TA. A total of 8 terminations have been recorded. By its 2 channels, the electronic component provides high-quality output. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. A total of 8 pins are injected into the electrical part body. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Use TS5A2066 to search for variants of the digital switches. It has an internal resistance of 10Ohm. For details about the functions of 8 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Digital switch that provides Single power at a cost-effective price. A low voltage of 1.65V should be applied to the electronic component. For this multiplexer to operate, 100nA current would be sufficient. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. A 2 input needs to be operated. This switch operates within the bandwidth of 300MHz.
TS5A2066DCURE4 Features
2 Channels Switch Circuit: SPST - NO 100nA Supply Current Bandwidth: 300MHz
TS5A2066DCURE4 Applications
There are a lot of Texas Instruments TS5A2066DCURE4 Analog Switches & Multiplexers ICs applications.
Precision data acquisition
Microprocessor Controlled Analog Systems
Existing multiplexer applications (both fault-protected and nonfault-protected)
Voice over IP/DSL – Integrated Access Devices, Smart