TS5A23157RSERG4 Overview

A high level of reliability can be achieved through the use of an advanced packaging method Tape and Reel. Total terminations are 10. The electronic part provides high-quality output because it has 2 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. The electrical component body receives 10 pins. An switch multiplexer with 10Ohm internal resistance has a value of 10Ohm. Datasheets for 10 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 1.8V. An operating current of 1μA would be sufficient for this switch device. When the digital multiplexer is charged above 10μA, damage can occur. There are 220MHz bandwidths for data transfer. Don't forget the additional features of this electronic part, such as: VIDEO APPLICATION. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer. A analog switch ics with 4 outputs is included.

TS5A23157RSERG4 Features

2 Channels
1μA Supply Current
Bandwidth: 220MHz
Additional Features: VIDEO APPLICATION

TS5A23157RSERG4 Applications

There are a lot of Texas Instruments
TS5A23157RSERG4 Analog Switches & Multiplexers ICs applications.

• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement