TS5A3159ADCKTG4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in SOT-70-6. In order to provide high reliability, an advanced packaging method Tape and Reel is used. In total, there are 6 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. There are 6 pins injected into the electronic part body. It has an internal resistance of 1.1Ohm. The functions of 6 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Single supply type digital switch with a low cost. 1.65V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 100nA. A digital multiplexer may suffer damage if voltage is applied above 50nA. The transfer of data can be performed over 100MHz bandwidths. During operation, the multiplexer should not be exposed to a temperature above 85°C. The analog switch ics has 2 outputs.

TS5A3159ADCKTG4 Features

1 Channels
100nA Supply Current
Bandwidth: 100MHz

TS5A3159ADCKTG4 Applications

There are a lot of Texas Instruments
TS5A3159ADCKTG4 Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems