TS5A3159QDBVRQ1 Overview

Packed in SOT-23-6, the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Increasing operating temperature to around -40°C~125°C TA. In total, there are 6 terminations. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. The analog switch ics are built using SPDT switching circuits. TS5A3159 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 1.3Ohm. For details about the functions of 6 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. An effective Single supply digital multiplexer. A low voltage of 1.65V should be applied to the electronic component. For this multiplexer to operate, 100nA current would be sufficient. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. If put voltage greater than 500nA on the device, damage may be caused to the analogue multiplexer. Operating 1 inputs is required. There are various bandwidths available for data transfer. An output of 2 is provided by the digital multiplexer. Automotive, AEC-Q100 is a series number.

TS5A3159QDBVRQ1 Features

1 Channels
Switch Circuit: SPDT
100nA Supply Current
Bandwidth: 100MHz

TS5A3159QDBVRQ1 Applications

There are a lot of Texas Instruments TS5A3159QDBVRQ1 Analog Switches & Multiplexers ICs applications.

• Digital access cross connects
• Audio/video switches
• Avionics
• Power routing
• Communication systems
• Audio and video signal routing
• Channel Banks
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Multiplexers
• PBX interfaces