TS5A3359YZPR Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-XFBGA, DSBGA. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 3:1. Around -40°C~85°C TA is the extended operating temperature. A total of 8 terminations have been recorded. The electronic part delivers high-quality output through its 3 channels. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. An injection of 8 pins is performed into the body of the electrical component. Multiplexers built on a SP3T switching circuit are built. Look for analog switch ic variants by searching with TS5A3359. A 900mOhm internal resistance characterizes this multiplexer. To find out what the functions of 8 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. An effective Single supply digital multiplexer. 1.65V should be the lowest voltage fed to the electronic component. An operating current of 16nA would be sufficient for this switch device. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. Put voltage above 50nA on the multiplexer to cause damage. The 1 inputs need to be operated in order to work. This switch operates within the bandwidth of 100MHz. Multiplexer ics with 3 outputs are available.

TS5A3359YZPR Features

3 Channels
Switch Circuit: SP3T
16nA Supply Current
-3db Bandwidth: 75MHz
Bandwidth: 100MHz

TS5A3359YZPR Applications

There are a lot of Texas Instruments TS5A3359YZPR Analog Switches & Multiplexers ICs applications.

• Audio and video switching
• Cable Modem
• Intelligent PBX
• Fiber In The Loop (FITL)
• Fiber to the Home
• Audio and video signal routing
• PBX interfaces
• Audio and video routing
• High-Voltage
• FTTH