UC2825NG4 Overview

It comes in the 16-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. For outputs of 2, this dc motor controller is suitable. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) are supported. 8.4V~30V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 340kHz~460kHz . The Through Hole makes it ideal for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control, Ramp, Soft Start is included in the dcdc regulator. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 16 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 15V. A search for "UC2825" will reveal other relevant dc to dc converter ics. Pins number 16 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. 8.8V should be the minimum input voltage for the dc dc voltage regulator. DC regulator outputs 5.2V voltage according to the test statistics. The dc to dc regulator can only accept 30V input voltage. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. Switching controller operates at 1MHz Hz. The value of DC to DC voltage regulator is set to CAN ALSO BE CONFIGURED IN CURRENT MODE in order to better satisfy the requirement. The supply voltage should be 15V. There should be 33mA current exceeding 33mA supplied to the controller.

UC2825NG4 Features

Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UC2825NG4 Applications

There are a lot of Texas Instruments UC2825NG4 DC to DC converter applications.

• Telecommunications equipment
• Servo drive system
• Special machining machine tools
• ATMs
• Grinders
• Digital video recorders
• Domestic water pumps
• Milling machines
• Analog precision reference circuits
• Arc suppression circuits