UC2843ANG4 Overview

In the 8-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 7.6V~30V volts and has 7.6V~30V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at Up to 500kHz. As it has a Through Hole value, it can be used for general dc dc regulator. To provide efficient switching control, Frequency Control is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. In addition to "UC2843", there are other relevant dc to dc converter ics you can find. There are 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 15V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. A frequency of 500kHz is set for the switching controller. It is possible to set the input voltage as 25V for nominal working statuses. This voltage controller requires a supply voltage of 11V. It is important that the controller is supplied with 25mA more than 25mA volts of current. Input of 11mA current flow would satisfy the operation requirements of the switching converter .

UC2843ANG4 Features

Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 500kHz

UC2843ANG4 Applications

There are a lot of Texas Instruments
UC2843ANG4 DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment