UC2524NG4 Overview

With its 16-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. For outputs of 2, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 8V~40V and has a 8V~40V supply voltage. Worked in a -25°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 300kHz. The Through Hole allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control, Ramp. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 20V is input. Searching "UC2524" will return other relevant dc to dc converter ics. 16 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 40V. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 45 %. Switching controllers work at 450kHz Hz. A nominal working status is achieved when the input voltage is set to 40V.

UC2524NG4 Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit, Enable, Frequency Control, Ramp
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 450kHz

UC2524NG4 Applications

There are a lot of Texas Instruments
UC2524NG4 DC to DC converter applications.

• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots