UCC3803PWTRG4 Overview

Capsuled in the 8-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 1. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sVoltages 3.6V~12V are the dc control's supply voltage and operating voltage, respectively. Worked in an dc switcher with a 0°C~70°C TA rating. A switching controller such as this can switch at a value of 31kHz . dc dc regulator is made easier with Surface Mount. Frequency Control is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 8 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. 10V nominal DC switcher's voltage input. Other relevant dc to dc converter ics will be returned if you search "UCC3803". 8 pins are on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. The minimum input voltage of the dc dc voltage regulator should be 4V. The test statistics indicate that DC regulator outputs a voltage of 1V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1A. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controllers operate at 1MHz frequencies. There must be a voltage supply of 10V volts. The controller should not be supplied with more current than 25mA.

UCC3803PWTRG4 Features

Transistor Driver Outputs
Switching Frequency: 31kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz

UCC3803PWTRG4 Applications

There are a lot of Texas Instruments UCC3803PWTRG4 DC to DC converter applications.

• Hydraulic presses
• Balance equipment
• Electric heating, lighting
• Product burn-in
• Wind power
• Large fire protection systems
• ATMs
• Sink circuits
• Production lines
• Power supplies of electronic gadgets