UCC2801NG4 Overview

As a result of PDIP compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. The switching controller is capable of switching at the 1MHz position. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 8. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 10V. 8 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 5V voltage. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. Switching controller operates at 1MHz Hz. A temperature -40°C lower than -40°C should be maintained. A temperature of 85°C more than 85°C degrees Celsius should be maintained in the undc regulator. In total, thare switch converters have 1 functions. A voltage regulators switching with 8 pins is designed. At maximum frequency, the controller can switch at 1MHz. Inputs of 1A are ideal for this component. This algorithm outputs a value of 1V in normaloperation. The supply voltage should be 10V. You should not supply more current than 30mA to the controller. Voltage is rated 12V for maximum supply.

UCC2801NG4 Features

Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC2801NG4 Applications

There are a lot of Texas Instruments
UCC2801NG4 DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery