UCC2808AN-2 Overview

The switching controller fits in the 8-DIP (0.300, 7.62mm) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 2 numbers. There is a Tube solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sDC control operates at 4.1V~15V volts and has 4.1V~15V supply voltage. Worked in an dc switcher with a -40°C~85°C TA rating. There is a switch at 194kHz that can be used with this controller. dc dc regulator is made easier with Through Hole. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a DUAL terminal on the switching converters. An array of 8 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input of 10V. A search for "UCC2808" will reveal other relevant dc to dc converter ics. Total pins of switching converter are 8. Switching converter type is specifically Switching Regulator or Controllers. 4.3V should be the minimum input voltage for the dc dc voltage regulator. DC regulator outputs 500mV voltage based on test statistics. You should note down the dc dc regulator's usual output current of 100mA when you start a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. Because of DC switcher's Through Hole, it is suitable for most prototype designs and applications. Switching controller operates at 1MHz Hz. Voltage 10V must be supplied. There is 1mA nominal current supply for this the controllers dc.

UCC2808AN-2 Features

Transistor Driver Outputs
Switching Frequency: 194kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC2808AN-2 Applications

There are a lot of Texas Instruments UCC2808AN-2 DC to DC converter applications.

• Adjustable voltage or current linear circuits
• Geothermal power
• Low output voltage switching power supply circuits
• Electrical distribution systems
• Magnetohydrodynamic power
• Mobile phones
• Digital display device
• Handheld GPS
• Correction machines
• Smoke exhaust equipment