UCC28220PWG4 Overview

It comes in the TSSOP package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. The switching controller can be switched at 1.1MHz. The switch converters are connected to an analog IC with a DUAL SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. In total, switching converter has 16 pins. Statistically, DC regulator outputs 3.3V volts. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 77 %. 2MHz is the frequency of the switching controller. The temperature should be at least -40°C. DC regulator should run at a temperature 105°C higher than 105°C. As a whole, there are 1 function(s) in the switch converters. Designing voltage regulators switchings with 16 pins is one of the most important aspects of the process. It is possible for the controller to switch at a frequency of 2MHz. 48V is the nominal working voltage. A 10mA input switching controller would benefit from it. When it is working normally, it outputs a value of 400mV. There must be a voltage supply of 12V volts. A controller's current should not exceed 6mA. A maximum supply voltage of 14.5V is specified.

UCC28220PWG4 Features

Switching Frequency: 1.1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 77 %
Frequency: 2MHz

UCC28220PWG4 Applications

There are a lot of Texas Instruments
UCC28220PWG4 DC to DC converter applications.

• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment