UCC3813D-0 Overview

In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. 1 outputs can be generated with the dc motor controller. Tube is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 6.9V~12V and has a 6.9V~12V supply voltage. Suitable for a 0°C~70°C TA dc switcher. There is a switch at 46kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. Frequency Control is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. DUAL are the position of the terminal of the switching converters. An array of 8 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis 10V volts. You can find other relevant dc to dc converter ics by searching "UCC3813". Switching converter has a total of 8 pins. Switching converter is a type of Switching Regulator or Controllers in particular. The minimum input voltage of the dc dc voltage regulator should be 7.5V. As determined by the test statistics, the output voltage of DC regulator is 1V. If you are starting a new project, you should note the dc dc regulator's typical output current is 1A. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. The Surface Mount makes DC switcher suitable for most applications and prototypes. 1MHz is the frequency of the switching controller. There is a requirement for a 10V supply voltage. It is not recommended to supply more current to the controller than 30mA. There is 500μA nominal current supply for this the controllers dc.

UCC3813D-0 Features

Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz

UCC3813D-0 Applications

There are a lot of Texas Instruments UCC3813D-0 DC to DC converter applications.

• Electric heating, lighting
• Digital video recorders
• ATMs
• Experimental setup
• Driver circuits
• Scientific research
• Die casting equipment
• Network technology
• Smoke prevention equipment
• Automation technology