74LCX574FT(AE) Overview
It is packaged in the way of TSSOP. D flip flop is embedded in the Tape & Reel (TR) package. D latch consists of 1 elements. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is powered from a supply voltage of 1.8V. This D flip flop belongs to the family of LVC/LCX/Z. This electronic part is mounted in the way of Surface Mount. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The maximal supply voltage (Vsup) reaches 3.6V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It consumes 10μA of quiescent current without being affected by external factors. The high level output current is set to 24mA. The low level output current is set to 24mA. The operating temperature should be lower than 85°C. The operating temperature should be higher than -40°C. The frequency that can be achieved is 150MHz. The logic IC it adopts is BUS DRIVER. It is equipped with 1 Functions .
74LCX574FT(AE) Features
Tape & Reel (TR) package
1 Functions
74LCX574FT(AE) Applications
There are a lot of Toshiba
74LCX574FT(AE) Flip Flops applications.
- Digital electronics systems
- Computers
- Communications
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
