SN74AC374NE4 Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. The output it is configured with uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. With a supply voltage of 2V~6V volts, it operates. Temperature is set to -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74ACseries contain this type of chip. You should not exceed 155MHzin the output frequency of the device. A total of 1 elements are present. Despite external influences, it consumes 4μAof quiescent current. Its input capacitance is 4.5pF farads.
SN74AC374NE4 Features
Tube package
74AC series
SN74AC374NE4 Applications
There are a lot of Rochester Electronics, LLC SN74AC374NE4 Flip Flops applications.
- Instrumentation
- Reduced system switching noise
- ATE
- Latch
- Guaranteed simultaneous switching noise level
- Counters
- Balanced Propagation Delays
- Safety Clamp
- Frequency division
- Convert a momentary switch to a toggle switch
