74HC273D Overview

20-SOIC (0.295, 7.50mm Width)is the way it is packaged. There is an embedded version in the package Cut Tape (CT). This output is configured with Non-Inverted. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. The operating temperature is -40°C~125°C TA. The type of this D latch is D-Type. FPGAs belonging to the 74HCseries contain this type of chip. You should not exceed 66MHzin the output frequency of the device. In total, there are 1 elements. It consumes 4μA of quiescent There have been 20 terminations. It is powered by a voltage of 4.5V . The input capacitance of this JK flip flopis 3pF farads. A device of this type belongs to the family of HC/UH. The maximal supply voltage (Vsup) reaches 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation.

74HC273D Features

Cut Tape (CT) package
74HC series

74HC273D Applications

There are a lot of Toshiba Semiconductor and Storage 74HC273D Flip Flops applications.

• Divide a clock signal by 2 or 4
• Data storage
• Data Synchronizers
• Dynamic threshold performance
• Pattern generators
• Shift registers
• Event Detectors
• Digital electronics systems
• Synchronous counter
• QML qualified product