74HC574D Overview

20-SOIC (0.295, 7.50mm Width)is the way it is packaged. As part of the package Cut Tape (CT), it is embedded. As configured, the output uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. It operates with a supply voltage of 2V~6V. In the operating environment, the temperature is -40°C~85°C TA. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74HC series. A frequency of 59MHzshould not be exceeded by its output. The element count is 1 . Despite external influences, it consumes 4μAof quiescent current. Terminations are 20. Power is supplied from a voltage of 4.5V volts. The input capacitance of this JK flip flopis 5pF farads. HC/UHis the family of this D flip flop. There are 20pins on it. This flip flop is designed with 8 Bits. Vsup reaches its maximum value at 6V. For normal operation, the supply voltage (Vsup) should be above 2V. The flip flop contains 2ports. The 7.8mA output current allows it to be designed with the greatest amount of flexibility. 8 gates are contained in its basic building block.

74HC574D Features

Cut Tape (CT) package
74HC series
20 pins
8 Bits
8 gates

74HC574D Applications

There are a lot of Toshiba Semiconductor and Storage 74HC574D Flip Flops applications.

• Automotive
• Buffered Clock
• Individual Asynchronous Resets
• Registers
• Matched Rise and Fall
• Memory
• Frequency Dividers
• ESD performance
• ESD protection
• Common Clocks