74VHC4051AFT Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. There is an analog multiplexer mounted in position Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~85°C TA are extended for operation. 16 terminations have been made so far. A 8 channel electronic part produces high-quality output. A 3V voltage supply should turn on and run the electronic component. There are 1 circuits in this switch device. Try searching for the analog switch ic with 74VHC4051 if you are looking for variants. In this multiplexer, the internal resistance is 37Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. normally, users should not supply switches with voltages higher than 5.5V. The lowest voltage the electronic part should receive is 2V. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs.

74VHC4051AFT Features

8 Channels
-3db Bandwidth: 180MHz

74VHC4051AFT Applications

There are a lot of Toshiba Semiconductor and Storage 74VHC4051AFT Analog Switches & Multiplexers ICs applications.

• New designs requiring multiplexer functions
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Industrial control systems
• E1 Multiplexer
• Precision test equipment
• Video signal routing
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• SONET
• Microprocessor Controlled Analog Systems
• Power routing