VBPW34FASR Overview

The photodiodes are packaged in the Digi-Reel® for protection. It is necessary to enclose the photodiodes in 2-SMD, Z-Bend packages for safety purposes. Under reverse-bias mode, the voltage of the photodiodes should not exceed 60V. The photodiodes have 2 pins. In a circuit, the photodiodes may release 215mW heat. For the photodiodes, the reverse anode voltage should be 60V. In general, the maximum heat generated by photodiodes should be 215mW in a circuit. In the DC circuit, the photodiodes can function properly with a reverse voltage of 60V. Photodiodes require an electric potential of 1.3V in order to conduct current. The photodiode operates at 2nA current even in the absence of light input.

VBPW34FASR Features

Moisture Sensitivity Level (MSL): 3 (168 Hours)
Operating Temperature: -40°C~100°C
Packaging: Digi-Reel®
Diode Type: PIN
Mount: PCB, Surface Mount
Spectral Range: 780nm ~ 1050nm
Viewing Angle: 130°

VBPW34FASR Applications

There are a lot of Vishay Semiconductor Opto Division VBPW34FASR Photodiodes applications.

• Vision Controls
• Emitter Alignment
• Light Bariers
• YAG laser detection
• Pulse Oximetry
• LiDAR
• Photo interrupters
• Industrial Automation
• Electronic Equipment
• Low Capacitance