DG201HSDQ-T1-E3 Overview

Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around -40°C~85°C TA. In total, there have been 16 terminations. By its 1 channels, the electronic component provides high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 16 series. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Use DG201 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 90Ohm. You can find the functions of the 16 pins in the datasheets. This switch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 25V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 13V. The analogue multiplexer could operate on 10mA current. When the digital multiplexer is charged above 10mA, damage can occur. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. In the case of dual power supplies, you should connect at least 7V. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. The electrical part can be operated at 16.5V voltage levels. It is possible to operate 4 inputs.

DG201HSDQ-T1-E3 Features

1 Channels
Switch Circuit: SPST - NC
10mA Supply Current

DG201HSDQ-T1-E3 Applications

There are a lot of Vishay Siliconix DG201HSDQ-T1-E3 Analog Switches & Multiplexers ICs applications.

• Residential Gateways, Home Gateway/Router
• T1/E1 Terminals
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Ultrasound
• Wireless Local Loop
• Medical
• Relay replacements
• Cross Connects
• Sample-and-hold systems
• SDH/SONET multiplexers