DG211BDY Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Bulk is used. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 1:1. Temperatures around -40°C~85°C TA are extended for operation. In total, 16 terminations have occurred. It is injected into the electrical part body with 16 pins. Circuits based on SPST - NC switching are used to construct these analog switch ics. This digital multiplexer has 85Ohm internal resistance. Please refer to the datasheets for 16 pins functions. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 25V. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended to use 4.5V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 30mA. If you put voltage higher than 10μA on the digital multiplexer, damage may occur. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. When using dual power supplies, you should attach at least 4.5V. There are 4 inputs to be operated. There is 85Ohm resistance between the Drain and Source on this part.

DG211BDY Features

Switch Circuit: SPST - NC
30mA Supply Current
Drain-to-Source resistance: 85Ohm

DG211BDY Applications

There are a lot of Vishay Siliconix DG211BDY Analog Switches & Multiplexers ICs applications.

• High speed data transmission line cards
• Frame Relay Equipment
• ATM
• Audio signal routing
• E1 Network Equipment
• Mechanical reed relay replacement
• Medical
• SDH/SONET multiplexers
• Medical systems
• Cable Modem