DG641DJ-E3 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 1:1. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 16. A 1 channel electronic part produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. These analog multiplexers are built based on SPST - NO switching circuits. A total of 4 circuits make up this switch device. Try searching with DG641 to find analog multiplexer variants. An switch multiplexer with 15Ohm internal resistance has a value of 15Ohm. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 21V voltage to the switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended to use 10V as the lowest voltage for the electrical part. In order to operate this switch device, it would need a current of 3.5mA. The analogue multiplexer may be damaged if voltage is greater than 6mA. There is no problem with using dual supply voltage, but it should not exceed 15V. If you are using dual power supplies, you should attach at least 10V. There is an integrated analog IC AUDIO/VIDEO SWITCH in the module. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. It can operate from 15V operating voltages. 500MHz bandwidths enable data to be transferred. Don’t miss additional features of the electronic component such as: VIDEO APPLICATION.

DG641DJ-E3 Features

1 Channels
Switch Circuit: SPST - NO
3.5mA Supply Current
Bandwidth: 500MHz
Additional Features: VIDEO APPLICATION

DG641DJ-E3 Applications

There are a lot of Vishay Siliconix DG641DJ-E3 Analog Switches & Multiplexers ICs applications.

• Cell phones
• Power routing
• Switching Systems
• Automatic test equipment
• Voice over IP/DSL – Integrated Access Devices, Smart
• Microprocessor controlled systems
• Sample hold systems
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Fiber to the Home
• Digital Cross-Connects