Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Temperatures around -40°C~85°C TA are extended for operation. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SPST - NC switching circuits. Use DG221 to search for variants of the digital switches. An switch multiplexer with 90Ohm internal resistance has a value of 90Ohm. To find out what the 16 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 18V to the switch device in normal circumstances. An effective Dual supply digital multiplexer. 13V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 800μA current. If put voltage greater than 1.5mA on the device, damage may be caused to the analogue multiplexer. For this switch, a dual supply voltage is feasible, but it must not exceed 18VIt is recommended that you attach at least 7V to your dual power supply. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. This electrical part is compatible with 15V operating voltages. Among the inputs that can be operated are the 4 inputs.
DG221BDY-E3 Features
1 Channels Switch Circuit: SPST - NC 800μA Supply Current
DG221BDY-E3 Applications
There are a lot of Vishay Siliconix DG221BDY-E3 Analog Switches & Multiplexers ICs applications.