DG2522DN-T1-E4 Overview

The electrical component comes in 8-UFQFN packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 3:1. Operating temperature around -40°C~85°C TA extended. A SP3T switching circuit is used for these analog switches. A total of 1 circuits make up this switch device. Try searching with DG2522 if you're looking for variants. The internal resistance of this digital multiplexer is 1.1Ohm. Datasheets for functions of 8 pins are available. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analog switch ics with Single supply type are cost-effective. The lowest voltage fed to the electronic component should be 1.6V. For this multiplexer to operate, 1μA current would be sufficient. A voltage of 1.6V~5.5V is required for this switch device, which drains from a single voltage source. A digital multiplexer may suffer damage if voltage is applied above 1μA.

DG2522DN-T1-E4 Features

Switch Circuit: SP3T
1μA Supply Current
-3db Bandwidth: 105MHz

DG2522DN-T1-E4 Applications

There are a lot of Vishay Siliconix DG2522DN-T1-E4 Analog Switches & Multiplexers ICs applications.

• Modems
• Medical systems
• Video signal routing
• Wireless Local Loop
• Channelized and Unchannelized DS3 applications
• Medical Instrumentation
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Automatic test equipment
• Multiplexers
• Microprocessor controlled systems