110ns, 30ns SPDT 450mOhm DUAL Analog Switches BREAK-BEFORE-MAKE DG2731 10 Pins 1nA 3V 10-VFDFN Exposed Pad
SOT-23
DG2731DN-T1-E4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
10-VFDFN Exposed Pad
Number of Pins
10
Weight
50.008559mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2009
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
10
Resistance
400mOhm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Multiplexer or Switches
Max Power Dissipation
1.191W
Technology
CMOS
Terminal Position
DUAL
Terminal Form
NO LEAD
Peak Reflow Temperature (Cel)
260
Number of Functions
2
Supply Voltage
3V
Terminal Pitch
0.5mm
Reach Compliance Code
unknown
Time@Peak Reflow Temperature-Max (s)
40
Base Part Number
DG2731
Output
SEPARATE OUTPUT
Pin Count
10
Qualification Status
Not Qualified
Number of Channels
1
Number of Circuits
2
Max Supply Voltage
4.3V
Min Supply Voltage
1.65V
Operating Supply Current
1μA
Max Supply Current
1μA
Turn On Delay Time
110 ns
Supply Type
Single
Turn-Off Delay Time
30 ns
On-State Resistance (Max)
450mOhm
Multiplexer/Demultiplexer Circuit
2:1
Off-state Isolation-Nom
75 dB
Current - Leakage (IS(off)) (Max)
1nA
Channel Capacitance (CS(off), CD(off))
104pF
On-state Resistance Match-Nom
0.03Ohm
Switch Circuit
SPDT
Switch Time (Ton, Toff) (Max)
110ns, 30ns
Charge Injection
9pC
Channel-to-Channel Matching (ΔRon)
30m Ω
Crosstalk
-75dB @ 100kHz
Switching
BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)
1.65V~4.3V
Height
880μm
Length
3mm
Width
3mm
RoHS Status
ROHS3 Compliant
DG2731DN-T1-E4 Product Details
DG2731DN-T1-E4 Overview
The electronic component is convenient to ship overseas because it is packed in a 10-VFDFN Exposed Pad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature extended to -40°C~85°C TA. In total, 10 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 10 pins. SPDT switching circuits are used in these analog switch ics. It consists of 2 circuits. Look for analog switch ic variants by searching with DG2731. In this multiplexer, the internal resistance is 400mOhm. To find out what the 10 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 4.3V volts for the multiplexer. A cost-effective Single supply type analogue multiplexer. In order for the electronic part to function properly, the lowest voltage should be 1.65V. The analogue multiplexer could operate on 1μA current. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~4.3V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. There are SEPARATE OUTPUT outputs on this analog switch ic.
DG2731DN-T1-E4 Features
1 Channels Switch Circuit: SPDT 1μA Supply Current
DG2731DN-T1-E4 Applications
There are a lot of Vishay Siliconix DG2731DN-T1-E4 Analog Switches & Multiplexers ICs applications.
Voice over IP/DSL – Integrated Access Devices, Smart