DG2735DN-T1-E4 Overview

As the electronic part is packed in 8-UFQFN, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 10. The electronic part provides high-quality output because it has 1 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. The electrical component body receives 10 pins. Circuits based on SPDT switching are used to construct these analog switch ics. Try searching with DG2735 to find analog multiplexer variants. An switch multiplexer with 500mOhm internal resistance has a value of 500mOhm. Datasheets for 8 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 4.3V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 1.65V. An operating current of 1μA would be sufficient for this switch device. Using a single voltage supply, this switch device consumes 1.65V~4.3V volts. When the digital multiplexer is charged above 1μA, damage can occur. Operating the 2 inputs requires 2 inputs. A analog switch ics with 4 outputs is included.

DG2735DN-T1-E4 Features

1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 50MHz

DG2735DN-T1-E4 Applications

There are a lot of Vishay Siliconix
DG2735DN-T1-E4 Analog Switches & Multiplexers ICs applications.

• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement