200ns, 150ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE DG308 16 Pins 500pA 15V 16-TSSOP (0.173, 4.40mm Width)
SOT-23
DG308BDQ-T1-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
15 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-TSSOP (0.173, 4.40mm Width)
Number of Pins
16
Weight
172.98879mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2016
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
160Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
640mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
15V
Terminal Pitch
0.65mm
Reach Compliance Code
unknown
[email protected] Reflow Temperature-Max (s)
40
Base Part Number
DG308
Output
SEPARATE OUTPUT
Pin Count
16
Qualification Status
Not Qualified
Power Supplies
+-15/12V
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
44V
Min Supply Voltage
4V
Operating Supply Current
1μA
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
200 ns
Voltage - Supply, Single/Dual (±)
4V~44V ±4V~22V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
150 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
85Ohm
Min Dual Supply Voltage
4V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
90 dB
Current - Leakage (IS(off)) (Max)
500pA
Channel Capacitance (CS(off), CD(off))
5pF 5pF
On-state Resistance Match-Nom
1.7Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
200ns, 150ns
Charge Injection
1pC
Channel-to-Channel Matching (ΔRon)
1.7 Ω
Crosstalk
-95dB @ 100kHz
Switching
BREAK-BEFORE-MAKE
Normal Position
NO
Height
920μm
Length
5.08mm
Width
4.4mm
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
3,000
$1.08000
$3.24
DG308BDQ-T1-E3 Product Details
DG308BDQ-T1-E3 Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Increasing operating temperature to around -40°C~85°C TA. There are 16 terminations totally. This electronic part offers high-quality output due to its 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. An electrical component of this type can be found in the 16 series. Unlike digital switches, these are based on SPST - NO switching circuits. A 4 circuit is present in this switch device. Try searching with DG308 to find analog multiplexer variants. As far as internal resistance is concerned, it has 160Ohm. The datasheets for the 16 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 44V to a switch device. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 4V. For this multiplexer to operate, 1μA current would be sufficient. A digital multiplexer may suffer damage if voltage is applied above 1μA. There is no problem with using dual supply voltage, but it should not exceed 22V. If you are using a dual power supply, you should attach at least 4V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.
DG308BDQ-T1-E3 Features
1 Channels Switch Circuit: SPST - NO 1μA Supply Current
DG308BDQ-T1-E3 Applications
There are a lot of Vishay Siliconix DG308BDQ-T1-E3 Analog Switches & Multiplexers ICs applications.