DG3157ADN-T1-E4 Overview

Presented in 6-UFDFN, this electrical component is convenient for overseas shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 2:1. The operating temperature is extended to around -40°C~85°C TA. There are 6 terminations totally. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. The electronic part body is injected with 6 pins. A SPDT switching circuit is used to build these analog multiplexers. There are 1 circuits in this multiplexer. Try searching with DG3157 if you're looking for variants. A 15Ohm internal resistance characterizes this multiplexer. To find out what the functions of 6 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Single supply type digital switch with a low cost. 1.65V should be the lowest voltage fed to the electronic component. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. In this switch multiplexer, there are SEPARATE OUTPUT outputs available.

DG3157ADN-T1-E4 Features

1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 300MHz

DG3157ADN-T1-E4 Applications

There are a lot of Vishay Siliconix DG3157ADN-T1-E4 Analog Switches & Multiplexers ICs applications.

• Industrial
• Isolation
• Voice over IP/DSL – Integrated Access Devices, Smart
• Battery Powered Systems
• DSUs
• Cross Connects
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Avionics
• SONET/SDH ADM
• Relay replacements