DG333ALDJ-E3 Overview

Packed in 20-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. The multiplexer is located in Through Hole. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. In total, there have been 20 terminations. The electronic part provides high-quality output because it has 1 channels. A 15V voltage supply should turn on and run the electronic component. The electronic part body is injected with 20 pins. SPDT switching circuits are used in these analog switch ics. 1 circuits are used in this analogue multiplexer. Try searching for DG333 variants of the analog switch ic. Analog switches have 75Ohm internal resistance. To find out what the functions of 20 pins are, please refer to their datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 40V should not normally be supplied to the switches. An effective Dual, Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 5V. This multiplexer would work with 1μA current. A digital multiplexer may suffer damage if voltage is applied above 1μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. For dual power supplies, a voltage of at least 4V should be attached. This analog switch ic utilizes SEPARATE OUTPUT output.

DG333ALDJ-E3 Features

1 Channels
Switch Circuit: SPDT
1μA Supply Current

DG333ALDJ-E3 Applications

There are a lot of Vishay Siliconix DG333ALDJ-E3 Analog Switches & Multiplexers ICs applications.

• E1 Multiplexer
• USB 1.1 signal switching circuits
• Audio and video routing
• High reliability control systems
• Cell phones
• Imaging
• Power routing
• SDH
• CSU
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8