DG444BDJ Overview

This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Through Hole. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 16 terminations. A 1 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NC switching circuits. Try searching for DG444 variants of the analog switch ic. Analog switches have 80Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 36V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 13V voltage fed to the electrical part below 13V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. The voltage should be at least 7V if you are using dual power supplies. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. In order to operate the 4 inputs, there are several steps to follow.

DG444BDJ Features

1 Channels
Switch Circuit: SPST - NC

DG444BDJ Applications

There are a lot of Vishay Siliconix
DG444BDJ Analog Switches & Multiplexers ICs applications.

• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems