DG412LDQ-T1 Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. 16 terminations have been made so far. A 1 channel electronic part produces high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. It is injected into the electrical part body with 16 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. There is 17Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 12V. Digital switch that provides Dual, Single power at a cost-effective price. 2.7V should be the lowest voltage fed to the electronic component. When the digital multiplexer is charged above 1μA, damage can occur. Despite this switch's dual supply capability, its voltage should not exceed 6V. With dual power supplies, you should attach at least 3V. There are SEPARATE OUTPUT outputs on this analog switch ic. Among the inputs that can be operated are the 4 inputs.

DG412LDQ-T1 Features

1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 280MHz

DG412LDQ-T1 Applications

There are a lot of Vishay Siliconix DG412LDQ-T1 Analog Switches & Multiplexers ICs applications.

• SDH/SONET multiplexers
• Battery Powered Systems
• Sample-and-hold systems
• Private Branch Exchange (PBX)
• Modems
• Microwave transmission systems
• PDH Multiplexers
• Remote Powered Equipment
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Cross Connects