DG418LDY-E3 Overview

This electronic part is conveniently packaged in 8-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 8 terminations. A 1 channel electronic part produces high-quality output. A 5V voltage supply should turn on and run the electronic component. As part of its design, the 8 series is equipped with this electronic component. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching for DG418 variants of the analog switch ic. Analog switches have 20Ohm internal resistance. To find out what the 8 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 12V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 2.7V voltage fed to the electrical part below 2.7V. It would be sufficient to run this analogue multiplexer with 1μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. The voltage should be at least 3V if you are using dual power supplies. In order to operate the 1 inputs, there are several steps to follow. This electronic part has additional features, such as: VIDEO APPLICATION. Resistivity from Drain to Source is 20Ohm for this electronic part.

DG418LDY-E3 Features

1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
Additional Features: VIDEO APPLICATION
Drain-to-Source resistance: 20Ohm

DG418LDY-E3 Applications

There are a lot of Vishay Siliconix
DG418LDY-E3 Analog Switches & Multiplexers ICs applications.

• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems