DG419LDY-E3 Overview

Shipping overseas is convenient with the electronic component packed in 8-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, you'll find this switch device. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 8. This electronic part offers high-quality output due to its 1 channels. An 5V voltage supply should allow the electrical part to be turned on and run. A key feature of the 8 series is the inclusion of this electronic part as part of its design. Unlike digital switches, these are based on SPDT switching circuits. Look for analog switch ic variants by searching with DG419. As far as internal resistance is concerned, it has 18.5Ohm. Datasheets for functions of 8 pins are available. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. Dual, Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 2.7V. It would be sufficient to run this analogue multiplexer with 1μA current. It may damage the digital multiplexer if the voltage is higher than 1μA. There is no problem with using dual supply voltage, but it should not exceed 6V. With dual power supplies, you should attach at least 3V. In order to operate the 1 inputs, there are several steps to follow. Don't miss this electronic component's additional features, such as: VIDEO APPLICATION. Drain to Source resistance is 35Ohm. An output of 2 is provided by the digital multiplexer.

DG419LDY-E3 Features

1 Channels
Switch Circuit: SPDT
1μA Supply Current
Additional Features: VIDEO APPLICATION
Drain-to-Source resistance: 35Ohm

DG419LDY-E3 Applications

There are a lot of Vishay Siliconix DG419LDY-E3 Analog Switches & Multiplexers ICs applications.

• Communication systems
• CSU
• Automatic test equipment
• USB 1.1 signal switching circuits
• MP3 players
• Power routing
• Signal routing between systems
• Audio signal routing
• Sample hold systems
• Multi-Line E1 Interface Cards