DG442BDY Overview

Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature around -40°C~85°C TA extended. The total number of terminations is 16. A electrical component with 1 channels is capable of high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. The electrical component body receives 16 pins. A SPST - NO switching circuit is used to build these analog multiplexers. An switch multiplexer with 80Ohm internal resistance has a value of 80Ohm. To find out what the 16 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 25V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 13V should be applied to the electronic component. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. There is no problem with using dual supply voltage, but it should not exceed 22V. If you are using dual power supplies, you should attach at least 7V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. The electrical component supports 4 inputs.

DG442BDY Features

1 Channels
Switch Circuit: SPST - NO

DG442BDY Applications

There are a lot of Vishay Siliconix DG442BDY Analog Switches & Multiplexers ICs applications.

• Optical Applications
• Medical systems
• Industrial
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Communication systems
• Multiplexers
• Channel Banks
• Battery Powered Systems
• Residential Gateways, Home Gateway/Router
• Avionics and Military Systems