250ns, 210ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE DG442 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)
SOT-23
DG442DY-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
13 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.154, 3.90mm Width)
Number of Pins
16
Weight
665.986997mg
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Published
2007
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
85Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
900mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
15V
Terminal Pitch
1.27mm
Time@Peak Reflow Temperature-Max (s)
30
Base Part Number
DG442
Output
SEPARATE OUTPUT
Pin Count
16
Number of Channels
1
Voltage
12V
Max Supply Voltage
36V
Min Supply Voltage
13V
Operating Supply Current
15μA
Nominal Supply Current
15μA
Power Dissipation
900mW
Max Supply Current
100μA
Throw Configuration
SPST
Turn On Delay Time
250 ns
Number of Inputs
4
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
120 ns
Max Dual Supply Voltage
22V
On-State Resistance (Max)
85Ohm
Min Dual Supply Voltage
7V
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
60 dB
Current - Leakage (IS(off)) (Max)
500pA
Channel Capacitance (CS(off), CD(off))
4pF 4pF
On-state Resistance Match-Nom
4Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
250ns, 210ns
Charge Injection
-1pC
Channel-to-Channel Matching (ΔRon)
4 Ω (Max)
Crosstalk
-100dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Switch-off Time-Max
210ns
Drain to Source Resistance
85Ohm
Normal Position
NO
Voltage - Supply, Dual (V±)
±15V
Height
1.55mm
Length
10mm
Width
4mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$5.191175
$5.191175
10
$4.897336
$48.97336
100
$4.620127
$462.0127
500
$4.358611
$2179.3055
1000
$4.111897
$4111.897
DG442DY-E3 Product Details
DG442DY-E3 Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. The electronic part delivers high-quality output through its 1 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 16 pins are injected into the body of the electronic part. Circuits based on SPST - NO switching are used to construct these analog switch ics. Try searching for the analog switch ic with DG442 if you are looking for variants. The internal resistance of this digital multiplexer is 85Ohm. For functions related to 16 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 36V voltage to the switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. There should be 13V voltage fed to the electrical part below 13V. The analogue multiplexer could operate on 15μA current. A voltage higher than 100μA may cause damage to the switch multiplexer. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. If you are using dual power supplies, you should attach at least 7V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. Operating 4 inputs is required. A Drain to Source resistance of 85Ohm is shown for this electronic part.
DG442DY-E3 Features
1 Channels Switch Circuit: SPST - NO 15μA Supply Current Drain-to-Source resistance: 85Ohm
DG442DY-E3 Applications
There are a lot of Vishay Siliconix DG442DY-E3 Analog Switches & Multiplexers ICs applications.