DG611AEQ-T1-E3 Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~125°C TA. A total of 16 pins are injected into the body of the electronic part. Circuits based on SPST - NC switching are used to construct these analog switch ics. Look for analog switch ic variants by searching with DG611. Analog switches have 72Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. It is recommended to use 2.7V as the lowest voltage for the electrical part. An operating current of 1μA would be sufficient for this switch device. A voltage higher than 100μA may cause damage to the switch multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 5V. You should attach at least 2.7V voltage if you are using dual power supply. In order to operate the 4 inputs, there are several steps to follow.

DG611AEQ-T1-E3 Features

Switch Circuit: SPST - NC
1μA Supply Current
-3db Bandwidth: 720MHz

DG611AEQ-T1-E3 Applications

There are a lot of Vishay Siliconix DG611AEQ-T1-E3 Analog Switches & Multiplexers ICs applications.

• Sample-and-hold systems
• Communications systems
• Routers
• DSLAMs
• Battery-powered systems
• Ultrasound
• Signal routing between systems
• Microprocessor Controlled Analog Systems
• Medical Instrumentation
• DVD-R