70ns, 50ns SPST - NO 15Ohm Analog Switches BREAK-BEFORE-MAKE DG641 16 Pins 10nA 15V 16-SOIC (0.154, 3.90mm Width)
SOT-23
DG641DY-E3 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.154, 3.90mm Width)
Number of Pins
16
Weight
665.986997mg
Operating Temperature
-40°C~85°C TA
Packaging
Tube
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Resistance
15Ohm
Terminal Finish
Matte Tin (Sn)
Additional Feature
VIDEO APPLICATION
Subcategory
Multiplexer or Switches
Max Power Dissipation
600mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
15V
Terminal Pitch
1.27mm
Time@Peak Reflow Temperature-Max (s)
40
Base Part Number
DG641
Output
SEPARATE OUTPUT
Pin Count
16
Operating Supply Voltage
15V
Power Supplies
15-3V
Number of Channels
1
Max Supply Voltage
18V
Min Supply Voltage
10V
Analog IC - Other Type
AUDIO/VIDEO SWITCH
Operating Supply Current
3.5mA
Nominal Supply Current
3.5mA
Power Dissipation
600mW
Max Supply Current
6mA
Throw Configuration
SPST
Turn On Delay Time
70 ns
Number of Inputs
4
Voltage - Supply, Single/Dual (±)
3V~15V ±3V~15V
Supply Type
Dual, Single
Bandwidth
500MHz
Neg Supply Voltage-Nom (Vsup)
-3V
Turn-Off Delay Time
50 ns
Max Dual Supply Voltage
15V
On-State Resistance (Max)
15Ohm
Min Dual Supply Voltage
10V
Dual Supply Voltage
12V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
60 dB
Current - Leakage (IS(off)) (Max)
10nA
Channel Capacitance (CS(off), CD(off))
12pF 12pF
On-state Resistance Match-Nom
1Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
70ns, 50ns
Charge Injection
19pC
Channel-to-Channel Matching (ΔRon)
1 Ω
Crosstalk
-87dB @ 5MHz
Switching
BREAK-BEFORE-MAKE
Switch-off Time-Max
85ns
Drain to Source Resistance
15Ohm
Normal Position
NC
Height
1.55mm
Length
10mm
Width
4mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
DG641DY-E3 Product Details
DG641DY-E3 Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Extended operating temperature around -40°C~85°C TA. A total of 16 terminations have been recorded. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the electrical part body. On the other hand, analog switches can be constructed using SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with DG641. In this multiplexer, the internal resistance is 15Ohm. For functions related to 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage higher than 18V should not normally be supplied to the switches. Digital switch that provides Dual, Single power at a cost-effective price. 10V should be the lowest voltage fed to the electronic component. An operating current of 3.5mA would be sufficient for this switch device. The analogue multiplexer may be damaged if voltage is greater than 6mA. There is no problem with using dual supply voltage, but it should not exceed 15V. If you are using a dual power supply, you should attach at least 10V. With a AUDIO/VIDEO SWITCH analog IC integrated into the board. There are SEPARATE OUTPUT outputs on this analog switch ic. 15V operating voltages are supported by the electronic component. Operating 4 inputs is required. The transfer of data can be performed over 500MHz bandwidths. Don't forget the additional features of this electronic part, such as: VIDEO APPLICATION. A Drain to Source resistance of 15Ohm is shown for this electronic part.
DG641DY-E3 Features
1 Channels Switch Circuit: SPST - NO 3.5mA Supply Current Bandwidth: 500MHz Additional Features: VIDEO APPLICATION Drain-to-Source resistance: 15Ohm
DG641DY-E3 Applications
There are a lot of Vishay Siliconix DG641DY-E3 Analog Switches & Multiplexers ICs applications.