DG642DJ-E3 Overview

The electrical component comes in 8-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. The advanced packaging method Tube provides high reliability. This analog switch is mounted in Through Hole. Multiplexers and demultiplexers have a number of circuits 2:1. Temperatures around -40°C~85°C TA are extended for operation. In total, 8 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. An 15V voltage supply should allow the electrical part to be turned on and run. This electrical component is included in the 8 series of products. Multiplexers built on a SPDT switching circuit are built. Look for analog switch ic variants by searching with DG642. Internally, this switch multiplexer has a resistance of 8Ohm. To find out what the 8 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 18V. Dual, Single supply type digital switch with a low cost. It is recommended to use 10V as the lowest voltage for the electrical part. For this digital switch to work, 3.5mA current would suffice. When the digital multiplexer is charged above 6mA, damage can occur. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 15V. A dual power supply should have at least 10V voltage attached. There is an analog IC AUDIO/VIDEO SWITCH integrated with this board. 15V operating voltages can be used with this electrical part. Operating 1 inputs is required. There are 500MHz bandwidths for data transfer. There is also VIDEO APPLICATION to look out for in this electronic part. This electronic component presents a Drain to Source resistance of 8Ohm. In this digital multiplexer, there are 2 outputs.

DG642DJ-E3 Features

1 Channels
Switch Circuit: SPDT
3.5mA Supply Current
Bandwidth: 500MHz
Additional Features: VIDEO APPLICATION
Drain-to-Source resistance: 8Ohm

DG642DJ-E3 Applications

There are a lot of Vishay Siliconix DG642DJ-E3 Analog Switches & Multiplexers ICs applications.

• Wireless Local Loop
• New designs requiring multiplexer functions
• Sample hold systems
• Signal routing between systems
• Audio and video routing
• Transmit
• Channel Banks
• PDH Multiplexers
• Microprocessor controlled systems
• Avionics and Military Systems