ADG1234YCPZ-REEL7 Overview

As the electronic part is packed in 20-WFQFN Exposed Pad, CSP, international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Around -40°C~125°C TA is the extended operating temperature. Due to its 4 channels, the electrical component produces high-quality output. The analog switch ics are built using SPDT switching circuits. A 4 circuit is present in this switch device. Look for analog switch ic variants by searching with ADG1234. The internal resistance of this digital multiplexer is 190Ohm. For functions related to 20 pins, please refer to the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16.5V. Dual, Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 5V. A digital multiplexer may suffer damage if voltage is applied above 475μA. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. You should attach at least 5V voltage if you are using dual power supply. Operating voltages of 12V are compatible with the electrical part. Operating 4 inputs is required. There are various bandwidths available for data transfer. Temperatures higher than 125°C are not recommended for operation of the analogue multiplexer. A Drain to Source resistance of 190Ohm is shown for this electronic part. There are 8 outputs on the analogue multiplexer. It is possible to purchase a 20-LFCSP-WQ (4x4) package from suppliers. The switch device is capable of conducting in a 4-bit mode.

ADG1234YCPZ-REEL7 Features

4 Channels
Switch Circuit: SPDT
-3db Bandwidth: 900MHz
Bandwidth: 900MHz
Drain-to-Source resistance: 190Ohm
4-Bit

ADG1234YCPZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG1234YCPZ-REEL7 Analog Switches & Multiplexers ICs applications.

• Digital cross connects (DSX-1)
• Battery-powered systems
• Channelized and Unchannelized DS3 applications
• Battery Powered Instruments
• Microprocessor controlled systems
• Optical Applications
• Cell phones
• Fault Tolerant Systems
• Intelligent PBX
• Cable Modem