ADG1404YRUZ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 14-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~125°C TA is the extended operating temperature. In total, there are 14 terminations. A 4 channel electronic part produces high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. An electrical component of this type can be found in the 14 series. Multiplexers built on a SP4T switching circuit are built. A 1 circuit is present in this switch device. Look for analog switch ic variants by searching with ADG1404. A 1.8Ohm internal resistance characterizes this multiplexer. Datasheets for 14 pin functions are available upon request. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 16.5V to a switch device. 5V is the lowest voltage the electrical component should receive. When the digital multiplexer is charged above 1μA, damage can occur. If put voltage greater than 16.5V on the multiplexer, damage may be caused to the device. It is recommended that you attach at least 4.5V to your dual power supply. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. A voltage of 12V can be used to operate the electronic component. A 4 input needs to be operated. A 55MHz-bandwidth can be used for data transfer.

ADG1404YRUZ Features

4 Channels
Switch Circuit: SP4T
Bandwidth: 55MHz

ADG1404YRUZ Applications

There are a lot of Analog Devices Inc. ADG1404YRUZ Analog Switches & Multiplexers ICs applications.

• Precision test equipment
• Imaging
• T1/E1 Terminals
• Routers
• Medical Instrumentation
• New designs requiring multiplexer functions
• Remote Powered Equipment
• Medical
• Cross Connects
• PDH Multiplexers