CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE
Max Power Dissipation
240mW
Technology
CMOS
Terminal Position
QUAD
Terminal Form
J BEND
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
15V
Terminal Pitch
1.27mm
[email protected] Reflow Temperature-Max (s)
40
Base Part Number
ADG201
Pin Count
20
Number of Channels
4
Max Supply Voltage
16.5V
Min Supply Voltage
10.8V
Power Dissipation
240mW
Max Supply Current
10mA
Throw Configuration
SPST
Turn On Delay Time
50 ns
Voltage - Supply, Single/Dual (±)
10.8V~16.5V ±13.5V~16.5V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-15V
Turn-Off Delay Time
50 ns
Max Dual Supply Voltage
16.5V
On-State Resistance (Max)
50Ohm
Min Dual Supply Voltage
10.8V
Dual Supply Voltage
15V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
72 dB
Current - Leakage (IS(off)) (Max)
1nA
Channel Capacitance (CS(off), CD(off))
10pF 10pF
On-state Resistance Match-Nom
3Ohm
Switch Circuit
SPST - NC
Switch Time (Ton, Toff) (Max)
50ns, 50ns
Charge Injection
10pC
Channel-to-Channel Matching (ΔRon)
1.5 Ω
Crosstalk
-86dB @ 100kHz
Length
8.965mm
Width
8.965mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Contains Lead
ADG201HSKPZ-REEL Product Details
ADG201HSKPZ-REEL Overview
This electronic part is conveniently packaged in 20-LCC (J-Lead), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 1:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 20 terminations. This electronic part offers high-quality output due to its 4 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. As part of the design of the 20 series, this electronic part has been incorporated into the system. A SPST - NC switching circuit is used to build these analog multiplexers. Use ADG201 to search for variants of the digital switches. There is 50Ohm internal resistance in this digital multiplexer. Datasheets for 20 pin functions are available upon request. It is normally recommended that users do not supply the multiplexer with voltages higher than 16.5V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended that the electrical component receives a voltage of 10.8V. A voltage higher than 10mA may cause damage to the switch multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 16.5V. With dual power supplies, you should attach at least 10.8V. Don't miss this electronic component's additional features, such as: CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE.
ADG201HSKPZ-REEL Features
4 Channels Switch Circuit: SPST - NC Additional Features: CAN ALSO OPERATE WITH SINGLE 10.8 TO 16.5 SUPPLY RANGE
ADG201HSKPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG201HSKPZ-REEL Analog Switches & Multiplexers ICs applications.