ADG508FBRNZ Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 16. As a result of its 8 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. The multiplexer consists of 1 circuits. Use ADG508 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 300Ohm. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 16.5V. A low voltage of 10.8V should be applied to the electronic component. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. A voltage of 15V can be used to operate the electronic component. A 8 input needs to be operated. There is 300Ohm resistance between the Drain and Source on this part.

ADG508FBRNZ Features

8 Channels
Drain-to-Source resistance: 300Ohm

ADG508FBRNZ Applications

There are a lot of Analog Devices Inc.
ADG508FBRNZ Analog Switches & Multiplexers ICs applications.

• Low-Voltage
• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems