Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG713BRUZ

  • ADG713BRUZ
  • ADG713BRUZ

ADG713BRUZ

ADG713BRUZ

Analog Devices Inc.

11ns, 6ns (Typ) SPST - NO/NC 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG713 16 Pins 100pA 3V 16-TSSOP (0.173, 4.40mm Width)

SOT-23

ADG713BRUZ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 3 weeks ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 4Ohm
Terminal Finish Matte Tin (Sn)
Additional Feature CAN ALSO OPERATE WITH 5 V SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 5μW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 3V
[email protected] Reflow Temperature-Max (s) 30
Base Part Number ADG713
Pin Count 16
Polarity Non-Inverting
Power Supplies 3/5V
Number of Channels 4
Interface Parallel
Max Supply Voltage 5.5V
Min Supply Voltage 1.8V
Operating Supply Current 1nA
Nominal Supply Current 1μA
Power Dissipation 5μW
Max Supply Current 1μA
Throw Configuration SPST
Turn On Delay Time 11 ns
Bandwidth 200MHz
Turn-Off Delay Time 6 ns
On-State Resistance (Max) 4Ohm
High Level Output Current 30mA
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 58 dB
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 10pF 10pF
On-state Resistance Match-Nom 0.1Ohm
Switch Circuit SPST - NO/NC
Switch Time (Ton, Toff) (Max) 11ns, 6ns (Typ)
Charge Injection 3pC
Crosstalk -90dB @ 10MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 20ns
Switch-off Time-Max 12ns
Voltage - Supply, Single (V+) 1.8V~5.5V
Drain to Source Resistance 2.5Ohm
Height 1.05mm
Length 5mm
Width 4.4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $4.30000 $4.3
500 $4.257 $2128.5
1000 $4.214 $4214
1500 $4.171 $6256.5
2000 $4.128 $8256
2500 $4.085 $10212.5
ADG713BRUZ Product Details

ADG713BRUZ Overview


This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 4 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. Using the ADG713 search parameter, you can discover variants of the switch. There is 4Ohm internal resistance in this digital multiplexer. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 5.5V. It is recommended to use 1.8V as the lowest voltage for the electrical part. This multiplexer would work with 1nA current. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. There are 200MHz bandwidths for data transfer. Don't miss this electronic component's additional features, such as: CAN ALSO OPERATE WITH 5 V SUPPLY. There is 2.5Ohm resistance between the Drain and Source on this part.

ADG713BRUZ Features


4 Channels
Switch Circuit: SPST - NO/NC
1nA Supply Current
Bandwidth: 200MHz
Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY
Drain-to-Source resistance: 2.5Ohm

ADG713BRUZ Applications


There are a lot of Analog Devices Inc. ADG713BRUZ Analog Switches & Multiplexers ICs applications.

  • DSUs
  • Cross Connects
  • FTTH
  • Cable Modem
  • Frame Relay Equipment
  • Multi-Line E1 Interface Cards
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Multiplexers
  • PBXs
  • Precision data acquisition

Related Part Number

NX3L4357GM,115
NXP USA Inc.
NX3L4357GM,115
$0 $/piece
ADG723BRM-REEL7
Analog Devices Inc.
ADG723BRM-REEL7
$0 $/piece
TS5A3166DBVR
Texas Instruments
TS5A3166DBVR
$0 $/piece
TS12A44515PWR
Texas Instruments
TS12A44515PWR
$0 $/piece
MAX4704EUB+T
Maxim Integrated
MAX4704EUB+T
$0 $/piece
MAX4536CSE+
Maxim Integrated
MAX4536CSE+
$0 $/piece
CD74HC4316M96
Texas Instruments
CD74HC4316M96
$0 $/piece
MAX4603EAE+
Maxim Integrated
MAX4603EAE+
$0 $/piece
DG405CJ+
Maxim Integrated
DG405CJ+
$0 $/piece
ADG819BRTZ-500RL7
Analog Devices Inc.
ADG819BRTZ-500RL7
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News