ADG452BRUZ-REEL7 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. 1:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. 16 terminations have been made so far. This electronic part offers high-quality output due to its 4 channels. With a 5V voltage supply, the electrical component should be turned on and run. There are 16 pins injected into the electronic part body. A SPST - NO switching circuit is used to build these analog multiplexers. Using the ADG452 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 5Ohm. For details about the functions of 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 12V. Analog switch ics with Dual, Single supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 5V. An operating current of 100pA would be sufficient for this switch device. If put voltage greater than 500nA on the device, damage may be caused to the analogue multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 15V. The voltage should be at least 5V if you are using dual power supplies. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. It can operate from 9V operating voltages. You shouldn't miss the additional features of the electrical component, such as: ALSO OPERATE WITH 12V SINGLE SUPPLY.

ADG452BRUZ-REEL7 Features

4 Channels
Switch Circuit: SPST - NO
100pA Supply Current
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY

ADG452BRUZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG452BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.

• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Microprocessor Controlled Analog Systems
• USB 1.1 signal switching circuits
• Cell phones
• Digital Cross-Connects
• Modems
• CSU
• Audio/video switches
• PDH Multiplexers
• Power routing