Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG5413BRUZ-REEL7

  • ADG5413BRUZ-REEL7
  • ADG5413BRUZ-REEL7

ADG5413BRUZ-REEL7

ADG5413BRUZ-REEL7

Analog Devices Inc.

187ns, 138ns SPST - NO/NC 10Ohm Analog Switches BREAK-BEFORE-MAKE ADG5413 16 Pins 250pA 15V 16-TSSOP (0.173, 4.40mm Width)

SOT-23

ADG5413BRUZ-REEL7 Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 3 months ago)
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 16
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 10Ohm
Terminal Finish MATTE TIN
Additional Feature 2 SWITCHES WITH INVERTED LOGIC
Subcategory Multiplexer or Switches
Max Power Dissipation 1mW
Technology CMOS
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 15V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number ADG5413
Output SEPARATE OUTPUT
Pin Count 16
Qualification Status Not Qualified
Number of Channels 1
Interface Parallel
Max Supply Voltage 40V
Min Supply Voltage 9V
Test Frequency 1MHz
Operating Supply Current 80μA
Power Dissipation 1mW
Max Supply Current 55μA
Throw Configuration SPST
Turn On Delay Time 202 ns
Number of Inputs 4
Voltage - Supply, Single/Dual (±) 9V~40V ±9V~22V
Supply Type Dual, Single
Bandwidth 160MHz
Neg Supply Voltage-Nom (Vsup) -15V
Turn-Off Delay Time 145 ns
Max Dual Supply Voltage 22V
On-State Resistance (Max) 10Ohm
Min Dual Supply Voltage 9V
Dual Supply Voltage 15V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 78 dB
Current - Leakage (IS(off)) (Max) 250pA
Channel Capacitance (CS(off), CD(off)) 17pF 17pF
On-state Resistance Match-Nom 0.35Ohm
Switch Circuit SPST - NO/NC
Switch Time (Ton, Toff) (Max) 187ns, 138ns
Insertion Loss (dB) -0.6 dB
Charge Injection 310pC
Channel-to-Channel Matching (ΔRon) 1.5 Ω
Crosstalk -70dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 262ns
Switch-off Time-Max 182ns
Height Seated (Max) 1.2mm
Length 5mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $37.210990 $37.21099
10 $35.104708 $351.04708
100 $33.117649 $3311.7649
500 $31.243064 $15621.532
1000 $29.474589 $29474.589
ADG5413BRUZ-REEL7 Product Details

ADG5413BRUZ-REEL7 Overview


This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there have been 16 terminations. A 1 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO/NC switching circuits. Try searching for ADG5413 variants of the analog switch ic. Analog switches have 10Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 40V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 9V voltage fed to the electrical part below 9V. It would be sufficient to run this analogue multiplexer with 80μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 55μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. The voltage should be at least 9V if you are using dual power supplies. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. In order to operate the 4 inputs, there are several steps to follow. In 160MHz-bandwidths, data can be transferred. This electronic part has additional features, such as: 2 SWITCHES WITH INVERTED LOGIC.

ADG5413BRUZ-REEL7 Features


1 Channels
Switch Circuit: SPST - NO/NC
80μA Supply Current
Bandwidth: 160MHz
Additional Features: 2 SWITCHES WITH INVERTED LOGIC


ADG5413BRUZ-REEL7 Applications


There are a lot of Analog Devices Inc.
ADG5413BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.


  • Ultrasound
  • Audio and video switching
  • Automatic test equipment
  • Precision data acquisition
  • Battery-powered systems
  • Sample-and-hold systems
  • Communication systems
  • Data Acquisition Systems
  • Relay Replacement
  • Battery Powered Systems

Related Part Number

74HC4316PW,118
Nexperia USA Inc.
74HC4316PW,118
$0 $/piece
MAX397EPI+
Maxim Integrated
MAX397EPI+
$0 $/piece
ADG608TRUZ
Analog Devices Inc.
ADG608TRUZ
$0 $/piece
ADG713BRZ
Analog Devices Inc.
ADG713BRZ
$0 $/piece
ADG1211YRUZ
Analog Devices Inc.
ADG1211YRUZ
$0 $/piece
MAX4052CPE
Rochester Electronics, LLC
MAX4052CPE
$0 $/piece
TC7SB66CFU,LF(CT
Toshiba Semiconductor and Storage
TC7SB66CFU,LF(CT
$0 $/piece
FSA1156P6X
ON Semiconductor
FSA1156P6X
$0 $/piece
MAX4802ACQI+
Maxim Integrated
MAX4802ACQI+
$0 $/piece
MAX314LCPE+
Maxim Integrated
MAX314LCPE+
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News