Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. A switch device like this is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Temperatures around -40°C~85°C TA are extended for operation. Totally, there are 16 terminations. By its 4 channels, the electronic component provides high-quality output. A 3V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. The analog switch ics are built using SPST - NO/NC switching circuits. Look for analog switch ic variants by searching with ADG713. There is 4Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. 1.8V is the lowest voltage that should be fed to the electronic electronic part. A voltage of 1.8V~5.5V is required to drain this analog switch from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. In 200MHz-bandwidths, data can be transferred. This electronic part has additional features, such as: CAN ALSO OPERATE WITH 5 V SUPPLY. The Drain to Source resistance of this electronic component is 2.5Ohm.
ADG713BRZ Features
4 Channels Switch Circuit: SPST - NO/NC Bandwidth: 200MHz Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY Drain-to-Source resistance: 2.5Ohm
ADG713BRZ Applications
There are a lot of Analog Devices Inc. ADG713BRZ Analog Switches & Multiplexers ICs applications.