ADG823BRMZ Overview

As the electronic part is packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), international shipping is convenient. Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~125°C TA. There are 8 terminations totally. This electronic part offers high-quality output due to its 2 channels. With a 3.6V voltage supply, the electrical component should be turned on and run. As part of the design of the 8 series, this electronic part has been incorporated into the system. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. Try searching for ADG823 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 600mOhm. For details about the functions of 8 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The digital multiplexer has a low cost Single supply. 1.8V is the lowest voltage that should be fed to the electronic electronic part. A voltage of 1.8V~5.5V is required to drain this analog switch from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 2μA. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. In 24MHz-bandwidths, data can be transferred.

ADG823BRMZ Features

2 Channels
Switch Circuit: SPST - NO/NC
Bandwidth: 24MHz

ADG823BRMZ Applications

There are a lot of Analog Devices Inc. ADG823BRMZ Analog Switches & Multiplexers ICs applications.

• Remote wireless modules
• Audio and video switching
• Transmit
• E1 Network Equipment
• Cable Modem
• New designs requiring multiplexer functions
• Digital cross connects (DSX-1)
• Modems
• Remote Powered Equipment
• PBX interfaces